• School of Materials Science and Engineering

    Chinese Version

    Location: Home > Faculty & Staff > Faculty

    HUANG Jihua

    Professor at Department of Materials Processing and Control Engineering


    Jihuahuang47@sina.com

    +86-010-62334859

    Main Building, Room 403

    Available to act as adviser for international graduate student: Yes



    Biography

    Dr. Jihua Huang is the Prof. of Materials Science and Engineering School at USTB, a member of the council in Chinese welding society, a Editorial Board Member of Chinese journal of materials research, Journal of the Chinese society of rare earths, Materials science and technology and Transactions of the China Welding Institution, etc. He holds a B.S, a M.S and Ph.D.  in 1983, 1986 and 1990 from Harbin Institute of Technology, respectively. He was visiting scholar at Tohoku University, Japan, in 1996.9-1997.4.


    Research Interests

    1. Joining technologies of dissimilar materials, such as Joining of nonmetal/metal and dissimilar metals, MIG/TIG double-sided arc welding-brazing of dissimilar metals, etc.

    2. Micro-joining technologies and reliability for microelectronic packaging, such as New soldering technologies and materials for microelectronic surface mount(SMT), Reliability assessment and measurement of the solder joints,  bonding technologies (materials and processes)  for high-temperature power device packaging, etc.

    3. Advanced coating  technologies, such as Thermal barrier coatings, Wear-resistant coating, Reactive thermal spraying, etc.


    Active Research Projects

    1.“Study on the Characteristics and Kinetics of Ni-Sn TLPS Bonding for High-Temperature Power Devices”, National Natural Science Foundation of China, 2015.1-2018.12

    2.“Study on Kinetics and interfacial reaction of diffusion brazing for Cf/SiC composite material and Titanium alloy”, National Natural Science Foundation of China, 2012.1-2015.12

    3.“The new joining technology of ultra-high temperature structure materials”, Advanced research project for weapon, 2011.1-2015.12.


    Published Research (English Only) 

    [1]Meng Han, Jihua Huang*, Shuhai Chen. “Behavior and mechanism of the stress buffer effect of the inside ceramic layer to the top ceramic layer in a double-ceramic-layer thermal barrier coating”,Ceramics International, 2014, 40(2): 2901-2914.

    [2]Bing Cui, Jihua Huang*, Chuang Cai, Shuhai Chen, Xingke Zhao. “Microstructures and mechanical properties of Cf/SiC composite and TC4 alloy joints brazed with (Ti–Zr–Cu–Ni)+W composite filler materials”, Composites Science and Technology, 2014, 97: 19-26. 

    [3]Meng Han, Guodong Zhou, Jihua Huang*, Shuhai Chen. “Optimization selection of the thermal conductivity of the top ceramic layer in the Double-Ceramic-Layer Thermal Barrier Coatings based on the finite element analysis of thermal insulation”, Surface and Coatings Technology, 2014, 240: 320-326. 

    [4]Shuhai Chen, Jihua Huang*, Ke Ma, Xingke Zhao and Anupam Vivek. “Microstructures and Mechanical Properties of Laser Penetration Welding Joint With/Without Ni-Foil in an Overlap Steel-on-Aluminum Configuration”, Metallurgical and Materials Transactions A, 2014, 45A: 3064-3073.

    [5]Meng Han, Jihua Huang*, ShuHai Chen. “A parametric study of the Double-Ceramic-Layer Thermal Barrier Coating Part II: Optimization selection of mechanical parameters of the inside ceramic layer based on the effect on the stress distribution”, Surface and Coatings Technology, 2014, 238: 93-117. 

    [6]Meng Han, Guodong Zhou, Jihua Huang*, Shuhai Chen. “Optimization selection of the thermal conductivity of the top ceramic layer in the Double-Ceramic-Layer Thermal Barrier Coatings based on the finite element analysis of thermal insulation”, Surface and Coatings Technology, 2014, 156: 199-207

    [7]Bing Cui, Jihua Huang*, Jinhui Xiong, Shuhai Chen, Xingke Zhao, “Reaction- composite brazing of carbon fiber reinforced SiC composite and TC4 alloy using Ag–Cu–Ti–(Ti+C) mixed powder”, Materials Science and Engineering: A 2013,562:203-210. 

    [8]Meng Han, Guodong Zhou, Jihua Huang*, ShuHai Chen. “A parametric study of the double-ceramic-layer thermal barrier coatings part I: Optimization design of the ceramic layer thickness ratio based on the finite element analysis of thermal insulation (take LZ7C3/8YSZ/NiCoAlY DCL-TBC for an example)”, Surface and Coatings Technology, 2013, 236: 500-509.

    [9]Chen Shuhai, Huang Jihua*, Xia Jun, Zhang Hua, Zhao Xingke, “Microstructural characteristics of a stainless steel/copper dissimilar joint made by laser welding”, Metallurgical and Materials Transactions A, 2013, 44(8): 3690-3696

    [10]Shuhai Chen, Jihua Huang*, Ke Ma, Hua Zhang, Xingke Zhao. “Influence of a Ni-foil interlayer on Fe/Al dissimilar joint by laser penetration welding”, Materials Letters, 2012, 79: 296-299.

    [11]Jianying Xiang, Shuhai Chen, Jihua Huang*, Hua Zhang, Xingke Zhao. “Phase structure and thermophysical properties of co-doped La2Zr2O7 ceramics for thermal barrier coatings”, Ceramics International, 2012, 38(5): 3607-3612. 

    [12]Shuhai Chen, Jihua Huang*, Donghai Cheng, Hua Zhang, Xingke Zhao. “Superplastic deformation mechanism and mechanical behavior of a laser-welded Ti–6Al–4V alloy joint”, Materials Science and Engineering: A, 2012,541: 110-119.13. 

    [13]Jin Hui Xiong, Ji Hua Huang*, Hua Zhang, Xing Ke Zhao. “Brazing of carbon fiber reinforced SiC composite and TC4 using Ag–Cu–Ti active brazing alloy”, Materials Science and Engineering: A, 2010, 527(4-5): 1096-1101.

    [14]Haitao Wang, Jihua Huang*, Jinglei Zhu, Hua Zhang, Xinke Zhao. “Microstructure of cermet coating prepared by plasma spraying of Fe–Ti–C powder using sucrose as carbonaceous precursor”, Journal of Alloys and Compounds, 2009, 472(1-2): 1-5.

    [15]Lihua Qi, Jihua Huang*, Xingke Zhao, Hua Zhang. “Effect of thermal-shearing cycling on Ag3Sn microstructural coarsening in SnAgCu solder”, Journal of Alloys and Compounds, 2009, 469(1-2): 102-107.


    亚洲第一区欧美日韩精品,亚洲精品综合欧美一区二区,亚洲欧美日韩精品a∨